What is cast drawing, and how can a photo grid help me practice it?

Choose a photo of your plaster cast; JPG, PNG, WebP and iPhone HEIC photos open.

Van Gogh’s Sunflowers with a grid over it
Your photo, with its grid
Sample pencil copy of Van Gogh’s Sunflowers on grid paper, half finished
Your drawing, square by square

A photo grid helps with cast drawing, the practice of drawing a plaster copy of a sculpture to learn how light turns form, by breaking your photo of the cast into small named squares you can copy one at a time. Choose a photo and a numbered grid appears on it straight away, starting with 8 squares across the short side, each named like a map reference such as A1. Save the picture or print it, then draw the cast on paper square by square.

In art, a cast is a plaster copy of a sculpture, and cast drawing is the practice of drawing it by eye to learn light, shadow and form. Photograph your cast, put a numbered grid over the photo here, and you can copy what you see into matching squares on paper. The grid gives every feature an address, so you always know where to look.

How to use cast drawing

  1. Choose a photo of the cast

    Press “Choose a photo” and pick a picture of your cast from your phone or computer. On a computer you can also drag the photo onto the page.

  2. Pick how many squares you want

    The numbered grid appears at once with Medium, which is 8 squares across the short side. Press Fewer for 5 squares for big shapes, or More for 12 squares when you want to place small details.

  3. Adjust the lines if you need to

    Open “Adjust grid” to add half-square guide lines, change the line color, thickness or opacity, or turn off the square names. Lines start dark on a light photo and white on a dark one.

  4. Save or print the grid

    Press “Save to Photos” on a phone or “Download” on a computer. Press “Print” for two sheets at true size: the photo with its grid, then the same grid empty to draw on.

Photograph the cast before you add the grid

Place the cast against a plain, quiet background and light it from one side with a single lamp. Dim the other lights in the room so the shadows stay dark and the shapes in the light stay easy to read. Stand square to the cast with the camera at the height of its middle, so a tilted view does not stretch the proportions.

Keep the whole cast in the frame with a little space around it, and turn the flash off, because a flash flattens the shadows you want to study. For a head or bust, hold the camera upright. A matte white finish reads best; shiny spots on a glossy surface can look like marks that are not part of the form.

Start with a simple cast

A hand, a foot or a single feature such as a nose or an eye gives you fewer decisions than a full head. Choose a cast with crisp edges rather than a worn copy whose details have gone soft, because soft details make it hard to tell where a shadow really ends. Once a block-like hand feels comfortable, move to a larger piece. The same grid steps apply to each.

Match the grid on your paper

Draw the same grid lightly on your drawing paper, with the same number of squares across and down. Write the letters along the top and the numbers down the side, so A1 on the photo is A1 on the paper. If you draw on the printed empty sheet, the squares already match. If you want a larger drawing, read the square width printed on the sheet and make each square on your paper wider by the same factor, for example twice as wide for a drawing twice the size. Keep the lines pale so a kneaded eraser can lift them later.

Block in the big shapes square by square

Look at one square at a time. Note where the outline of the cast crosses each side of the square, mark those points on your paper, then join them with straight lines before you think about curves. A column of squares gives you a quick check on the height of a feature; a row gives you its position from left to right. If an edge falls in the middle of a square, switch on the half-square guide lines under “Adjust grid” so you can place it more closely. Work from the largest shapes down to the smallest, and leave detail until the end.

Draw the shadow shapes, not the outline

Narrow your eyes to see the photo as a few simple tones. Find the edge where light turns into shadow and mark where it crosses each square. Fill the shadow as one flat shape first, then add the half-tones that step between light and dark. The “Black and white photo” switch under “Adjust grid” removes color so you can judge the values alone. If the grid lines hide a soft edge, make them thinner or lighter with the line thickness and opacity controls, or pick a color that stands apart from the tones around it.

Check your drawing with fresh eyes

When a drawing looks nearly finished, errors are hard to see. Switch on “Mirror the photo” under “Adjust grid” and compare the reversed photo with your drawing held up to a mirror; a crooked jaw or a feature set too high often stands out at once. You can also tap a square to open it large, then step through the squares in reading order and compare each one with the same square on your paper.

Choose materials that forgive changes

Charcoal and soft graphite both suit cast work, because you can lay broad shadow shapes and lift highlights back out with a kneaded eraser. Paper with a little tooth holds the tone. A mid-toned paper lets you add white chalk for the lights and leave the paper itself as the half-tone. Whatever you pick, keep the grid lines on your paper lighter than the first marks of the drawing.

Build a short routine around one photo

Draw the same cast three ways. First use Fewer and block in only the large masses. Then print a Medium grid and refine the edges of the shadows.

Finally use More and place the small features. Another day, photograph the same cast with the lamp on the other side and draw it again, to see how the same form changes under different light. Short sessions on a hand or a single feature teach more than one long attempt at a whole head, and every printed grid gives you a fresh empty copy for the next try.

FAQ

What does cast mean in art?

In art, a cast is a copy of a sculpture made by pouring plaster into a mold taken from the original. Artists set a cast in front of them and draw it, so they can study form and light on a calm, single-colored object instead of a living model.

Why is cast drawing useful?

Cast drawing trains you to see form as light and shadow. A white plaster cast has one color and one surface, so your attention goes to where the light stops, how the half-tones step down and how a rounded shape turns away. Those habits carry over to any subject you draw.

Can I use a photo of a cast instead of the cast itself?

Yes, a photo works well for the grid method. You get one fixed view to measure against, which suits practice at a desk or planning where the shapes sit before you start. The real cast lets you walk around it, so use it too when you can.

How many squares should I use for a cast?

Medium, with 8 squares across the short side, suits most casts. Fewer gives 5 squares for the first block-in of large shapes, and More gives 12 squares when you want to place an eye, an ear or the edge of a shadow more closely.

Will the printed squares be the right size?

Yes, as long as you print at 100% or actual size in the print window. Each printed sheet states how wide its squares are. The paper is Letter or A4 by your browser’s region, and “Adjust grid” also offers A3.

Is it free, and is my photo uploaded?

The tool is free, needs no sign-up and adds no watermark. Your photo is read and drawn in your browser and is never uploaded, so the picture of your cast stays on your phone or computer.

Updated

Back to the tool