What is the rabatment of the rectangle, and where does it fall on my photo?

Choose a photo (JPG, PNG, WebP or iPhone HEIC) to see the grid over it.

Van Gogh’s Sunflowers with a grid over it
Your photo, with its grid
Sample pencil copy of Van Gogh’s Sunflowers on grid paper, half finished
Your drawing, square by square

The rabatment of the rectangle is made by folding the short side of a frame over onto the long side, which marks a square at each end. On your photo, the lines fall where the inner edges of those two squares are: one short-side length in from each end of the long side. Choose a photo and a thin 3 by 3 grid appears over it. On a 3:2 photo, the two lines across the long side (the vertical lines on a landscape photo) are the rabatment lines; the other two thirds lines are not. For other shapes, “Adjust grid” lets you change the grid.

A rabatment line is the inner edge of a square whose side equals the frame’s short side, set against one end of the frame. Two such squares overlap in the middle of most photos, and their inner edges give two lines. On a 3:2 photo those lines coincide with the thirds, and on every other shape they land somewhere else.

How to use rabatment

  1. Choose your photo

    Press “Choose a photo” and pick a JPG, PNG, WebP or iPhone HEIC file. On a computer you can also drag the photo onto the page. The grid appears at once.

  2. Read the two lines each way

    Two vertical and two horizontal thin lines split the photo into nine equal parts. On a 3:2 landscape photo, the two vertical lines are the rabatment lines; on a 3:2 portrait photo, the two horizontal lines.

  3. Match the grid to your frame

    Open “Adjust grid” to crop the photo to the shape you plan to use. Each crop has its own proportion, so read the lines again after cropping: the rabatment lines move with the frame.

  4. Save or print the result

    Press “Save to Photos” on a phone or “Download” on a computer. “Print” gives two sheets: the photo with its grid, then the empty grid to draw on.

Check a canvas or sheet before you start

Measure the frame you plan to work in before you decide anything about the picture. A painter with a 16 by 20 canvas has a short side of 16, so the rabatment lines sit 16 in from each end of the 20 side, which means at 16 and at 4 measured from the left. Mark both on the edge of the canvas with a pencil tick. Then the lines are on the surface before the first shape goes down, and you can test any reference photo against them.

If your reference photo has a different shape from the canvas, crop it to the canvas shape under “Adjust grid” first. The grid then describes the picture you will really paint, and the thirds lines and the rabatment lines can be compared on the same shape.

  1. Work out the lines by hand for any frame

    The rule is short: take the short side, lay it along the long side from one end, and mark where it stops. Do the same from the other end. Two marks, two lines. For a landscape frame of width W and height H, the marks sit at H and at W minus H from the left. For a portrait frame, swap the words: the marks sit at W and at H minus W from the top.

    This arithmetic is worth doing once for the shapes you use most. Write the results on a card next to your drawing board.

    So on a 3:2 photo you can read the two long-side thirds lines straight off the print; the other two thirds lines play no part. On the other shapes, measure the marks with a ruler on the printed sheet and draw them in pencil. Lowering Line opacity under “Adjust grid” makes the printed thirds recede so your own two marks stand out.

  2. 3:2 photo: one third and two thirds, the same as thirds.
  3. 4:3 photo: one quarter and three quarters.
  4. 16:9 photo: 7/16 and 9/16 of the width, close either side of the center.
  1. Place subjects against the lines, not on points

    A rabatment line works as the edge of an area. Think of each square as a stage: the figure, the tree or the building fills or fronts that stage, and the line is where the stage ends. A standing figure can have the near edge of the body on the vertical line, with the leftover strip behind or beside it breathing as background.

    When you review your picture on the grid, ask three questions:

    A subject that straddles both squares is not wrong. It is simply a different structure, and the overlap in the middle becomes the busy zone.

  2. Does a strong edge, such as a wall, a trunk or a table front, rest on or near a line?
  3. Does the main mass sit inside one square, or does it straddle the overlap in the middle?
  4. What is left in the strip outside the squares, and does it carry anything important?

Landscapes and the horizon

On a landscape frame the lines are vertical, so they divide the picture into a left square, a right square and a shared middle. A tall tree, a lighthouse or a fence post can stand on one line, with open sky or water filling the rest of that square. Check the horizon too: it does not belong to the vertical lines, so decide separately whether it sits high or low, and keep it away from the exact middle of the picture.

Read the grid from left to right and note which square holds more visual weight. Many pictures feel steadier when one square is busy and the other is quiet.

Portrait photos and horizontal lines

Turn your thinking a quarter turn. On a portrait photo the lines are horizontal, so the squares are stacked, one above the other. A head-and-shoulders photo often has the face in the upper square and the hands or the clothing in the lower one. Before sketching, look at where the upper line crosses the figure and note which feature it passes through. That note becomes a reference when you draw the same pose from life.

A photo taken sideways is stood the right way up when it opens, so the lines you read are the ones for the picture as people see it.

Crop several versions and compare

Photographers who crop after the shot can use the lines to compare options. Open the picture and read the grid. Then crop tighter on one side, read the lines again, and note how the subject’s edge moves relative to them. A crop that moves the main edge onto a line is often the quieter one; a crop that leaves it halfway between a line and the frame edge is often the busier one. Press “Save to Photos” or “Download” on the version you prefer, so the grid stays on the picture you are comparing.

Press “Choose another photo” to move on to the next frame in a set. Comparing three photos of the same subject on the same grid takes a few minutes and shows which one has its edges settled.

Draw the structure on paper

Print the sheets and use the second one. The empty grid gives you the same lines on paper, in the same proportions as the photo. Draw your subject’s main masses with the lines as guides, then check each mass against the first sheet. For a drawing at a size of your own, copy the squares’ proportions to your paper, not their printed size.

Before printing, open “Adjust grid” and check the paper size. A landscape photo prints on a landscape sheet, and a portrait photo on a portrait sheet. In the print window, choose 100% or actual size, since the sheet states the width of its squares and that figure is only right at full size.

If the square names are in the way of your own pencil marks, switch Square names off before printing; they are removed from both sheets.

Sketch small before you commit

Before a large painting, draw a thumbnail in the same proportions as the canvas. Use the empty printed sheet, which already has the right shape, and block in two or three dark masses with a soft pencil. Put the main edge on a rabatment line in one thumbnail and between the lines in another. Set them side by side and pick the one that reads from across the room.

Thumbnails cost minutes, and a canvas costs days. The lines are only a way to make the comparison fair.

Look at a finished picture

Load a photo of a painting or drawing you already made, and read where its main edges meet the lines. Many people find that a picture they like already has one or two edges resting along a line, without ever having planned it. That finding is useful: it tells you what your eye already looks for, and you can then place it on purpose in the next picture.

Use the same method for a photo you did not take, such as a reference you were given. The lines show whether the framing is helping the picture, or whether you want to crop before you start.

When thirds and rabatment disagree

On a 3:2 photo you will never see a difference. On a 4:3 photo the two sets sit a little apart: thirds at one third and two thirds, rabatment at one quarter and three quarters. Compare the printed thirds with your own pencil marks at the quarters. A main edge between the two sets belongs to neither structure, which is a sign to move it a little, or to decide you want that tension.

Choose one structure per picture. Mixing both usually leaves a subject trying to satisfy two sets of lines at once, and the picture ends up with no clear rule. If thirds feels natural for a shot, use thirds; if the frame is wide or tall and the squares feel true to it, use the rabatment.

Frame a print or a mat before you buy it

Before ordering a frame or cutting a mat, put the photo on the grid and note where its strongest edge falls. Then compare it with the lines you worked out for the opening. A mat opening with a different shape moves the lines, so a picture that sat well on a line in the full photo may drift off it once the mat cuts away an inch on one side.

Try this with an 8 by 10 photo. The short side is 8, so the marks sit 8 from the left and 8 from the right, which means at 8 and at 2 along the 10 side. That is one fifth and four fifths of the width. Print the sheet, mark those two points along the top edge, and hold it beside the mat sample.

Teach the construction to a class

A short exercise shows the idea better than a diagram. Give each student a printed photo and a pencil. Ask them to fold the paper so one short edge lies along a long edge, then crease it.

The edge of the folded flap now lies on the line: mark it in pencil, then unfold. Repeat from the other end. Students then read where the horizon, a face or a wall meets a crease.

Use the empty grid sheet as a second round. Each student copies the main shapes onto it, using the printed lines as guides. Comparing the sheets side by side shows how much of the picture the lines really organize.

Make the lines readable on any photo

Thin lines can vanish on a busy picture. Open “Adjust grid” and try a different line color. Black suits a pale sky or snow, white suits a dark interior, and Pick a color lets you choose a hue that stands apart from the picture’s own colors, such as a bright red on a green landscape.

Line thickness and Line opacity work together. A thicker, softer line is easier to follow on a small phone screen. A thinner, stronger line is better when you want to judge an edge exactly. The Black and white photo option removes color so only tone and lines compete for attention.

When you have settled the look, “Reset settings” brings back the starting values for the next picture.

Near squares and exact squares

A frame close to a square puts the two lines near the edges. The squares overlap almost completely, so the overlap zone fills most of the picture. In that case the lines say little about where to put a subject. They remain a useful check on whether an edge sits too close to the border.

When the frame is exactly square, skip the rabatment and use the grid for what it does well: equal parts and a clear view of where each shape sits.

FAQ

What does rabatment mean?

Rabatment means folding down, from the French rabattre. In composition, the short side of a rectangle is folded over onto the long side, which marks a square at each end. The inner edges of those two implied squares are the rabatment lines, so the frame’s own shape decides where they sit.

Where do the rabatment lines land?

They land one short-side length in from each end of the long side. On a 3:2 photo that is exactly one third and two thirds across. On a 4:3 photo it is three quarters and one quarter. The closer the frame is to a square, the nearer the lines sit to the edges.

Is the rabatment just the rule of thirds on a photograph?

Only in part. On a 3:2 photograph, the two thirds lines across the long side are the rabatment lines, and the other two thirds lines are not. On other shapes they separate. A 4:3 photo puts the rabatment lines at the quarters, and a 16:9 photo puts them close either side of the center, at 7/16 and 9/16 of the width.

Why does it stop working on wide frames?

On a very long frame, the two squares no longer overlap and leave an uncovered strip between them. The lines then mark the edges of that strip instead of a shared middle zone. On a long panorama they sit far apart, and each square covers only one end of the picture.

What happens on a square frame?

Nothing falls inside the picture. The inscribed square is the frame itself, so both lines sit on the edges. A 3 by 3 grid still cuts the picture into nine equal parts, but those lines are not rabatment lines.

Why is a square the shape being inscribed?

A square fits any rectangle using only its short side, so no extra measure is needed. The frame supplies the size, and the structure belongs to that picture alone. Painters also like squares because they read as stable, which gives a composition a settled base.

Is a rabatment line a placement target like a thirds intersection?

No. A thirds intersection is often used as a spot for a subject, while a rabatment line is the boundary of a square area. Let a horizon, a figure’s edge or a wall rest along the line, or let a main shape fill one square, instead of aiming at a point.

Does it work on portrait photos?

Yes, with the lines turned sideways. On a portrait frame the squares sit at the top and bottom, so the lines are horizontal: one frame width down from the top and one frame width up from the bottom. Read the photo the same way, from the top edge and the bottom edge.

How do I use it on a picture I have not cropped yet?

Choose the photo, open “Adjust grid” and crop before judging the lines. Each crop has its own shape and therefore its own line positions. Try the crop you are considering, read where the lines fall, then press “Choose another photo” to compare a different picture.

If the lines nearly land on thirds, is thirds not simpler?

On a 3:2 photo, yes, because the two sets of lines are the same. On other shapes the rabatment follows the frame’s own proportion, which thirds ignore. When the two differ, laying the grid next to a hand-worked line shows whether the gap matters for your picture.

How do I find the rabatment on an 8 by 10 photo?

Take the short side, 8, and measure it in from each end of the 10 side. The marks fall at 8 and at 2, which is four fifths and one fifth of the width. Print the sheet and mark those two fractions of the photo’s width with a ruler.

Updated

Back to the tool