How do I trace a photo onto paper?
Choose the photo you want to trace; it is read in your browser and never uploaded.


The way to trace a photo onto paper is to get the picture at the size you want to draw, hold it steady under or behind your drawing paper, and follow the outlines with a light pencil. When the drawing is bigger than your printer sheet, choose the photo here and set how many sheets wide the poster should be. The page splits the picture across Letter or A4 sheets in a PDF, and you tape the sheets together and trace.
Knowing how to trace a photo onto paper comes down to three things: a printed or lit copy of the photo at drawing size, a way to see its lines through your paper, and tape that keeps both still. For a large drawing, print the photo across several taped sheets, then lay your paper over them and draw the outlines first.
How to use how to trace a photo onto paper
Choose your photo
Press “Choose a photo” and pick the picture you want to trace. The poster choices are open from the start, so you can set the size straight away.
Set the poster size
Set “Sheets across” or type a “Poster width” in cm or inches. The line under it shows how many sheets you need, how wide the poster prints, and about how many pixels per inch the photo gives.
Add grid lines if you want them
Tick “Print grid lines on the poster” if you want a grid to draw by, or leave it off for a plain photo. Then save the PDF, which is free for up to 2 by 2 sheets.
Print, tape and trace
Print the sheets. Trim the white edge off the top sheet along the joining side, then lay it over the next sheet so the 6 mm strip of the same picture overlaps, and tape. Then lay your drawing paper over the taped photo, or on a light board, and trace the lines.
Choose a photo that traces cleanly
Pick a picture with clear edges between the subject and the background. A photo with strong light and shadow gives you shapes to follow, while a soft, hazy one leaves you guessing where an outline goes. Crop away empty areas before you choose it, so the subject fills the sheets rather than a wide border of sky or wall.
A photo you took yourself is a good choice, because the drawing then starts from your own view. If the photo has a hard-to-see corner, such as a dark coat against a dark door, plan to check that area against the screen at full zoom as you draw.
Decide the size of the drawing first
Measure the drawing paper or the frame before you set anything. Type that width as the poster width, so the printed picture is the same width as the paper you will trace onto. The free PDF goes up to 2 by 2 sheets at 150 dots per inch, and the line under “Poster width” shows the width it will really print. Matching the two means every outline lands exactly where the final drawing will sit.
If you would rather keep the drawing small, one sheet is enough, and you can skip the taping altogether. Larger drawings gain the most from printing in pieces, since a small photo enlarged on a single page loses its detail.
Before saving, read the figure for pixels per inch under the poster width. A figure near 300 looks sharp even up close. A figure under 100 looks soft up close, and soft edges are harder to follow with a pencil, so choose fewer sheets.
Pick a tracing method that suits your paper
Light board
Lay the taped photo on the board, tape your paper over it, and switch the light on. Dim the room if the lines look faint. Smooth, thin paper shows the picture best. Keep the pencil light, such as an HB or a harder H, so the lines stay easy to adjust, erase or cover with paint later.
Window
Tape the printed photo to the glass in daylight, then tape the paper on top. No equipment is needed, and the bright sky does the work of a light board. Arms tire when held up for long, so trace in short sessions, and begin with the largest shapes while your arm is fresh.
Graphite on the back
If your paper is too thick to see through, rub soft graphite over the back of the printed photo. Tape the photo face up on the drawing paper, with the graphite side down, and go over the outlines with a sharp pencil or a stylus. Pressure moves the graphite onto the paper below. Lift one corner now and then to check which lines have come through.
Press lightly. Heavy lines are hard to erase, and they can dent soft paper.
Keep everything from slipping
Movement is the main reason traced lines look doubled. Tape the photo to the table, then tape the drawing paper over it. Use low-tack masking tape and fix the top edge only, so the paper folds back like a page. You can then check progress and return to the exact position.
For a poster made of several sheets, join them first: trim the white edge off the top sheet along the joining side, then lay it over the next sheet so the 6 mm strip of the same picture overlaps, and tape from the back. Check that a road, a horizon or a face lines up across the join before you commit to the final tape.
Trace shapes before details
Start with the outer outline of the main subject, then the large interior shapes, such as the hair mass, a window frame or a horizon. Add small details last. If you start with eyes or leaves, an early slip is hard to correct and the large shapes can drift.
If you ticked the grid option, use the squares as landmarks: confirm that a line passes through the right place in one square, then move on to the next.
Trace a person or a pet
Mark the landmarks first: the top of the head, the chin, the corners of the eyes, the base of the nose and the corners of the mouth. Small dots are enough. Joining the dots with the outline afterward keeps the features at the right distance from each other, which matters more for a likeness than a perfect edge.
For an animal, trace the overall body shape before the fur. Fur edges are many tiny lines, and a single smooth outline reads better than a hundred nervous ones. Add the texture by eye once the shape is down.
Practice on cheap paper first
Do the first trace on inexpensive paper, then move to the good sheet when you are happy with the lines. Watercolor paper and other fine papers lose their surface when erased, and the damage can show later under paint. Light, confident lines on the final sheet leave nothing to rub out.
Check the tracing before you ink or paint
Lift the paper off the photo and hold the two side by side. Squint at both, or turn each upside down, and look for a shape that seems longer, shorter or more tilted than its twin. Errors that hide when you look at the right-way-up picture show up quickly this way.
Fix the biggest shape first, because a correction to the main outline moves everything inside it. Only when the large shapes agree should you refine the small ones.
Finish the drawing from the traced lines
Treat the traced outline as a map, not as the finished work. Compare the lines against the photo on the screen, fix any shape that looks stiff, and then add shading, edges and texture by eye. Lines you want to keep can be inked, and the leftover graphite can be lifted gently with a kneaded eraser.
Trace a photo as the first step of a painting
Use the plain photo, without grid lines, when the lines will end up under paint. Print the sheets, tape them together, and trace only the edges between large color areas: sky and hill, shirt and skin, table and wall. Skip small details, since paint will cover them.
Trace a photo with children or a class
Choose a photo with one clear subject, such as a pet or a single tree, and set two sheets across so the picture is big enough for small hands. Tape the paper over the printed photo on a table, not a window, so nobody has to hold an arm up. Ask each child to trace the outline first, then draw the inside shapes freehand.
Draw the subject facing the other way
Sometimes the drawing must face the opposite direction from the photo, for a card or a layout. Trace the photo on thin paper, turn the sheet over, and go over the lines from the back, where they show through. Then retrace on a fresh sheet with the lines the right way round.
FAQ
How do I trace an image onto paper?
Put the image under your paper, fix both with tape, and draw over the lines you can see through the sheet. Use a light pencil so the marks can be erased or inked later. Thin paper over a window or light board shows the lines best. A photo larger than one sheet can be printed in pieces and taped.
How do you trace a picture from your phone onto paper?
Open the tool in your phone’s browser, choose the photo, and save the PDF to print it. Without a printer, turn the screen brightness up, hold the phone flat against a window with the picture showing, tape thin paper over the screen, and trace the outlines by hand.
How to trace a picture on paper without tracing paper?
Use any thin, plain paper, such as printer paper, and hold the printed photo and the sheet against a window in daylight. Another way is to scribble soft graphite over the back of the printed photo, tape it face up on your drawing paper, and press along the lines with a sharp pencil.
How to trace over a photo without it moving?
Tape it down on at least two sides. Low-tack masking tape on the top edge works as a hinge, so you can lift the paper to check your lines and lower it back into the same spot. For a photo printed on several sheets, tape the sheets together first, then tape the whole poster to the table.
What is a light board for drawing?
A light board is a flat panel that glows from underneath, so the picture on it shines through the paper laid on top. You see the outlines clearly and trace them with a pencil. Thinner paper shows lines best, and thick paper needs a brighter board. A sunny window gives a similar result.
So why trace images?
Tracing gives you correct proportions and shapes at the start, so your time goes into shading, edges and details. Many people use it to practice seeing shapes, or to place a complex subject accurately before drawing freehand. It is a common way to begin a drawing, and many artists use it.
What pencil should I use to trace a photo?
Use a light pencil such as an HB or a harder H, and press gently. Pale lines are easy to adjust and erase. Keep the point sharp so the outline stays thin and follows the edges in the photo closely.
How big can I print a photo to trace?
Free PDFs cover up to 2 by 2 sheets, which makes a poster about twice the width of one sheet. Set “Sheets across” or type a “Poster width” and read the line under it. It tells you how wide the poster prints and whether the photo will look sharp.
Should I trace a photo with grid lines or without?
Use the plain photo when you only need outlines to follow. Tick “Print grid lines on the poster” when you want landmarks to check proportions on a large picture. Squares help you confirm that a line crosses the right place before moving to the next area.
Updated
Related tools
- 10x10 gridPrint a blank 10x10 grid with 100 squares in three sizes. Add numbers 1 to 100, then print the sheet or save it as a clear PNG.
4 Quadrant Graph PaperPrint free 4 quadrant graph paper with bold x and y axes, numbered both ways from 0. Pick square size and paper, then save as PDF, PNG or JPG.- 8x8 gridPrint a free 8x8 grid of 64 squares in your browser. Pick Small, Medium or Large squares, add letters and numbers, then print or save a PNG.
Add grid to photoAdd a grid to any photo in your browser, with no sign-up and no watermark. Get a numbered grid or a plain grid overlay, then save it or print it at true size.- Ar TracingInstead of ar tracing with a phone stand, put a numbered grid on your own photo, then save or print it and copy it square by square. Free, no sign-up.
Aspect Ratio CalculatorUse this aspect ratio calculator to turn a width and height into a ratio like 16:9. You also get the decimal and a resize that keeps the shape.- Atmospheric PerspectiveAdd a numbered grid to a photo and compare near and far squares to see atmospheric perspective: lighter values, softer color. Free, in your browser.
- Bargue DrawingPractice Bargue drawing from your own photo: add a numbered grid with 5, 8 or 12 squares across, then save it or print a gridded sheet and an empty one.