What is proportion in art, and how can I check it in my drawing?

Choose a portrait photo: a face or a full figure works well, in JPG, PNG, WebP or iPhone HEIC.

Van Gogh’s Sunflowers with a grid over it
Your photo, with its grid
Sample pencil copy of Van Gogh’s Sunflowers on grid paper, half finished
Your drawing, square by square

Proportion in art is how big each part of a picture is compared with the other parts and with the whole, and numbered squares let you check it on a portrait photo. Choose a photo and the grid appears, with square names like A1. Count how many squares a head, hand or shoulder covers, then save the gridded photo or print it with an empty sheet to draw on.

Proportion in art is the size relationship between parts of a work, such as head to body or door to house, and between each part and the whole. A grid gives every part a measurable place. Count the squares a feature covers on the photo, then give the same count on your drawing.

How to use proportion in art

  1. Choose a portrait photo

    Press “Choose a photo” and pick a picture of a face or figure. On a computer you can also drag the photo onto the page. The numbered grid appears right away.

  2. Pick how many squares

    Start with Medium, which has 8 squares across the short side. Press Fewer for 5 squares when you want big shapes, or More for 12 when small features need checking.

  3. Read the squares

    Tap any square to see it large, then press Next or Previous to walk through the squares in reading order. Note which names each feature touches, such as the chin in C6.

  4. Save or print

    Press “Save to Photos” on a phone or “Download” on a computer. “Print” gives two sheets at true size: the photo with its grid, then the same grid empty for drawing.

Choose a photo that shows the whole subject

Pick a picture where the head, or the whole figure, sits fully inside the frame. Proportion is about relationships, so a cropped foot or a cut-off hand leaves nothing to compare against. If the subject fills only a small part of the picture, use Crop under “Adjust grid” to remove empty space before the squares are counted. Rotate turns the photo a quarter turn when the pose is lying down.

Compare parts by counting squares

Start with one landmark and measure everything from it. Say the head runs from A1 down to B3: that is your unit. Now see how many of those units the torso covers, how far the hand reaches, and where the elbow lands. Write the square names beside each feature on your own sketch. Tap a square to see only that piece enlarged when a shape, such as an ear or a knuckle, is hard to read in the full picture.

Redraw on the empty sheet

Take the second printed sheet, the empty grid, and draw one square at a time. A line that crosses from B2 to C3 on the photo should cross the same squares on the paper. Work from the largest shapes to the smallest, and compare the full figure after every few squares. When a drawing looks wrong, the cause is often one part sitting a square too high or too wide, which the names make easy to find.

Look closer with half-square lines

Switch on the half-square guide lines under “Adjust grid” for small features. Eyes, fingers and the corners of a mouth sit between the main lines, and the thinner guides let you place them without a new, finer grid.

Spot mistakes with a changed view

Turn on “Mirror the photo” and compare the reversed photo with your drawing held up to a mirror. Errors in length or tilt jump out when the picture looks unfamiliar. “Black and white photo” removes color, so you judge only the size and shape of each mass. Save each version if you want to keep it next to the drawing.

Change proportion on purpose

Once the true proportions are on paper, you can break them with intention. Give the head extra room for a caricature, stretch the legs for a fashion figure, or enlarge the most important person in a group. Note which squares hold the part you are exaggerating, and draw it larger there while the other square names keep the rest of the figure in place. The distortion then stays organized, and the true proportions remain on the photo for comparison.

FAQ

What is proportion in art, with examples?

Proportion is the size relationship between the parts of a work and the whole. Examples are the head against the body in a figure, a door against the house around it, or a foreground tree against distant hills. Gridded squares let you measure each of these comparisons on a photo instead of guessing.

How do I find which square a feature sits in?

Read the square’s name, like a map reference: letters run across the columns and numbers run down the rows, so the top-left square is A1. Tap any square to open it large, then use Previous and Next to move through the squares in reading order.

What is the difference between proportion and scale in art?

Proportion compares parts with each other, while scale compares the overall size of an object or artwork with something else, such as real life or the viewer. A tiny drawing can have accurate proportion, and a huge mural can have poor proportion. Scale is about how big the whole looks; proportion is about how its parts relate.

What is proportion used for in art?

Proportion makes figures and objects look believable, helps a drawing match its reference, and directs attention. Artists also change it on purpose. A larger head or longer limbs can stress a mood or an idea. Checking the true proportions first makes any later change a deliberate choice.

How many squares should I use?

Medium, with 8 squares across the short side, suits most portraits. Fewer has 5 and shows only the big masses. More has 12 and helps when you want to place eyes, fingers or folds of cloth. Under “Adjust grid” you can also set your own columns and rows.

Does the photo leave my device?

No. The photo is read and drawn in your browser and is never uploaded. The tool is free, needs no sign-up and adds no watermark to the saved or printed picture.

Updated

Back to the tool