How do you use the Loomis method to draw a head from a photo?
Choose a portrait photo, ideally a face looking at the camera with even light.


To use the Loomis method, draw a ball for the skull, cut the sides flat, add a center line and level lines for brow, nose and chin, then place the features on those lines. Choose your portrait photo here and a numbered grid appears over it, so you can check every construction line against the reference and print the grid at true size.
The Loomis method builds a head from a ball with the sides sliced off, a center line, and level lines that divide the face into thirds. Features then sit on those lines. A grid over your reference photo lets you compare each line with the photo, square by square, before you add detail.
How to use loomis method
Choose a portrait photo
Press “Choose a photo” and pick a JPG, PNG, WebP or iPhone HEIC picture. On a computer you can also drag the photo onto the page. Sideways phone photos turn the right way up.
Read the numbered grid
The grid appears right away with 8 squares across the short side. Pick Fewer (5) or More (12) for coarser or finer checking. Each square has a name like A1, with letters across and numbers down.
Adjust the lines and look closer
Open “Adjust grid” to switch on half-square guide lines, or change line color, thickness and opacity. Tap any square to see it large, then use Previous and Next to walk through the squares.
Print or save the grid
Press Print for two true-size sheets: the photo with its grid, then the same grid empty to draw on. Choose 100% or actual size in the print window. Or use Save to Photos or Download.
Pick a reference photo that shows the head clearly
Start with a photo where the face fills most of the frame and the light is even. A straight-on view is the easiest first choice, because the left and right halves can be compared directly. Soft light from a window works well: it shows where the forehead, cheekbone and jaw turn away from the light. Skip photos with a hat brim or thick hair across the brow, since the brow line is the first line you need to find.
Before drawing, look at the photo for a minute. Where does the hair begin? Where do the brows sit? Is the chin tucked or lifted? Answering these first saves erasing later.
Build the front view in order
The order matters because each line gives the next one a place to sit. Draw everything lightly, with strokes you can erase or draw over.
Draw the ball and slice its sides
Draw a circle for the cranium. Then mark a vertical line down each side of the circle, slightly in from the edge, and treat the space between them as the front of the head. The slices you removed are the side planes, where the ears will go. A face seen from the front is narrower than a full circle, and these cuts show why.
Add the center line and the brow line
Draw a vertical line through the middle of the front plane. It tells you which way the face points. Then draw a horizontal line across the circle at its middle: this is the brow line. Both lines should curve slightly if the head tilts. A tilted head bends the lines like the stripes on a ball.
Divide the face into thirds
From the brow line, the face runs down to the chin. Mark the hairline above the brow line at the same distance that the nose line sits below it. Then place the chin line the same distance below the nose line. Hairline to brow, brow to nose, nose to chin: three roughly equal parts. Check the spacing by holding your pencil up to the photo and comparing the first third with the other two.
Place the features on the lines
The eyes sit just below the brow line, with the brows on it. The nose ends at the nose line. The mouth sits between the nose line and the chin, closer to the nose. The ears fit between the brow line and the nose line, on the side planes. Simple shapes are enough at this stage: an almond or circle for each eye, a small wedge for the nose, a flat curve for the lips.
Shape the jaw last
From the side planes, run lines down toward the chin to form the jaw. A wider jaw leaves the lines steeper and farther apart; a narrow face brings them closer. Soften the corners only after the construction lines match the photo.
Turn the head
Once the front view feels familiar, move to a three-quarter view and then a profile. The ball stays the same size, but the center line and brow line slide across it, and the side plane that faces you grows larger. In a profile the side plane becomes the main shape, and the ear sits near its middle, behind the center of the head. Looking up or down tilts the brow line into a curve.
Choose photos for these turns one at a time. One new angle per session teaches more than a page of mixed angles.
Check your construction against the photo
The most common problem is a head that drifts: the eyes end up too high, or the chin too long. Squares expose this early. Mark the same number of squares on your paper as on the photo, then compare where the brow line, nose line and chin fall in each row. If the brow line crosses the photo at the middle of one row but crosses yours a third of the way into the next, you can see how far to move it.
The center of the face usually falls between two vertical lines of the grid, so check the center line there first. Compare one square at a time rather than the whole face. Mistakes show up in a small square far sooner than in a full head.
Flipping your drawing in a mirror, or turning the photo upside down, is another way to see errors. Your eye stops reading the face and starts reading the shapes.
Work from big to small
Go over the squares in passes. On the first pass, look only at where the ball, the center line and the chin sit, and ignore the features. On the second pass, check the brow, nose and chin lines against the rows. Keep the close look at a single eye or ear for the last pass, once the large shapes agree.
For a tilted head, check that the center line follows the same curve in each column of your drawing as it does in the photo. A line that is correct in columns A and B but off in D shows exactly where the drift began.
When a grid over the photo helps most
- You are copying a head from a phone photo and the proportions keep drifting.
- You want to enlarge a small reference onto a bigger sheet without measuring each feature.
- You are practicing a three-quarter or tilted head and need to see how far the center line has moved across the face.
- You want a printed copy of the reference beside your blank sheet, so you can work away from the screen.
Adjust the lines for different faces
The default thirds suit an adult face seen straight on, but faces vary. A child’s cranium is large compared with the face, and the features sit lower on the head, so the brow line lies below the middle of the circle. An older face may have a longer nose line or a lower hairline. Measure the photo with your pencil and move the lines before you place a single feature.
Glasses, beards and hats change what you can see. Find the brow line from the position of the brow ridge, not from the frame of the glasses. For a beard, find the chin line from the bone under the hair, using the shadow under the jaw as a clue.
Practice routine that builds the habit
Short, repeated sessions beat one long one. A simple routine:
Keep the construction faint. If you press hard, the lines will not erase and the face will look stiff. A soft pencil or a pale digital layer under the final drawing keeps the lines out of the way.
- Draw the ball, center line and level lines from memory, then check against a photo.
- Draw several heads in a row from different photos, using only the construction lines.
- Next session, add the features to the same constructions.
- Save the finished sheets, so you can see the lines getting steadier from one page to the next.
Use the method as a guide, not a template
The method gives a starting structure. People’s faces differ: some have a high brow, some a long chin, some eyes set wide. Measure the real photo and adjust the lines to match. If every head you draw has the same thirds, the faces start to look alike.
For stylized or cartoon characters, the same lines still help. Exaggerate one part, such as a large cranium or a small jaw, and keep the other lines in place so the head still feels solid. For hair, draw its outer shape as a mass over the ball first, since hair adds volume above the hairline. Add strands and partings after the mass reads correctly.
Slips to watch for
When a drawing feels wrong, check the center line and brow line first. Almost every other mistake follows from those two.
- Drawing the circle too small, which leaves no room for the forehead.
- Placing the eyes above the brow line instead of just below it.
- Putting the ears at the very back of the head instead of on the side planes.
- Forgetting that the lower face extends below the ball.
- Pressing too hard in the first pass, so corrections leave marks.
Carry the squares over to your drawing paper
Squares only help when your paper has the same layout. Draw light squares on your sheet, or draw straight on a printed empty grid. Label the edges with the same letters across and numbers down as the photo. If the brow line crosses the photo in square C3, look for it in C3 on your sheet, and work through one square at a time instead of judging the whole head by eye.
Prepare the photo before you choose it
Crop out busy backgrounds in your phone’s photo editor if the head is small in the frame. A larger face means more squares fall on the features, and comparing is easier. If the photo is very dark, pick another one, since faint shadows hide the jaw and brow. A reference that shows both ears and the full chin gives you the most lines to check.
FAQ
How long does it take to learn the Loomis method?
There is no fixed time, because it depends on how often you practice. The steps can be read in one sitting and tried on a first head the same day. Steady repetition from different photos and angles builds the habit of seeing construction, and the angled views usually take longer than the front view.
Is the Loomis method effective?
Yes, as a way to organize a head before adding detail. The ball, center line and level lines keep features in proportion at any angle. It is a guide, not a rule: real faces vary, so adjust the lines to match your reference instead of forcing the face to fit.
What is the difference between the Loomis method and a Loomis head?
They name the same approach. “Loomis head” usually means the finished construction, a ball with flat sides, a center line and level lines. “Loomis method” means the steps used to build it. Both refer to constructing a head before adding detail, so the same grid check works for either.
Can I use the grid with a three-quarter or tilted photo?
Yes. Any portrait photo works, whatever the angle. Each square has a name like A1, so you can note which squares hold the brow line, nose line and chin, then look for the same squares in your drawing. The center line and brow line curve on a turned or tilted head.
Where do I draw the Loomis construction lines?
Draw them lightly on the empty printed grid sheet, or on your own paper marked with the same squares. Print gives two sheets at true size: the photo with its grid, and the same grid empty. Keep the lines faint so they can be erased or drawn over.
Updated
Related tools
- 10x10 gridPrint a blank 10x10 grid with 100 squares in three sizes. Add numbers 1 to 100, then print the sheet or save it as a clear PNG.
4 Quadrant Graph PaperPrint free 4 quadrant graph paper with bold x and y axes, numbered both ways from 0. Pick square size and paper, then save as PDF, PNG or JPG.- 8x8 gridPrint a free 8x8 grid of 64 squares in your browser. Pick Small, Medium or Large squares, add letters and numbers, then print or save a PNG.
Add grid to photoAdd a grid to any photo in your browser, with no sign-up and no watermark. Get a numbered grid or a plain grid overlay, then save it or print it at true size.- Ar TracingInstead of ar tracing with a phone stand, put a numbered grid on your own photo, then save or print it and copy it square by square. Free, no sign-up.
Aspect Ratio CalculatorUse this aspect ratio calculator to turn a width and height into a ratio like 16:9. You also get the decimal and a resize that keeps the shape.- Atmospheric PerspectiveAdd a numbered grid to a photo and compare near and far squares to see atmospheric perspective: lighter values, softer color. Free, in your browser.
- Bargue DrawingPractice Bargue drawing from your own photo: add a numbered grid with 5, 8 or 12 squares across, then save it or print a gridded sheet and an empty one.