How do I enlarge a drawing with a grid?

Choose the photo you want to copy from; a JPG, PNG, WebP or iPhone HEIC photo works.

Van Gogh’s Sunflowers with a grid over it
Your photo, with its grid
Sample pencil copy of Van Gogh’s Sunflowers on grid paper, half finished
Your drawing, square by square

To enlarge a drawing, put a grid over your reference photo, rule the same grid larger on your paper and copy one square at a time. Choose a photo here and a grid of numbered squares appears over the picture, ready to save or print. Squares are named like a map, so the top left is A1, and you always know which square to draw next.

To enlarge a drawing, lay a grid of squares over your reference, rule a grid with the same number of columns and rows on bigger paper, and copy each square into its match. Larger squares on the paper give a larger drawing. Letters and numbers on the squares keep you from losing your place.

How to use enlarge a drawing

  1. Choose your reference photo

    Press “Choose a photo” and pick the picture you want to copy. On a computer you can drag the photo onto the page. JPG, PNG, WebP and iPhone HEIC files open, and sideways photos turn the right way up.

  2. Pick how many squares

    The grid appears right away at Medium, with 5 squares across the short side. Press Fewer for 3 across or More for 8. Fewer squares suit bold shapes; More suits faces and fine detail.

  3. Print or save the gridded photo

    Press Print for two sheets at true size: the photo with its grid, then the same grid empty. Choose 100% or actual size in the print window. On a phone, use Save to Photos instead (Download on a computer).

  4. Rule the big grid and copy square by square

    Rule larger paper with the same columns and rows, and mark the letters and numbers along the edges. Copy what sits in A1 into A1, then B1, and on. Tap a square on screen to see it large.

Choose a reference that is easy to copy

Pick a photo with a clear subject and light that shows shapes. A face lit from one side, a still life on a plain table or a building with strong edges all copy well. Crop away clutter before you start, because every square you keep is a square you have to draw. Photos with very deep shadows hide detail, so check that the areas you care about can still be seen on screen.

If your reference is a small drawing on paper, photograph it flat, in even light, with the camera held parallel to the sheet. A camera tilted to one side bends the edges, and the bend gets copied into every square.

Decide how many squares you can handle

Think about what one square will hold. In a loose landscape, a square can hold a cloud edge and a patch of hill. In a portrait, the square around an eye should hold the eye and little else. Fewer squares mean larger, simpler pieces and quick ruling. More squares mean smaller pieces that are easier to copy exactly but take longer to rule.

Start with the middle size. Go up only when single squares feel crowded, and go down when the ruling starts to feel like the main job.

Work out the size of your squares

Start from the width of your paper or canvas. Divide the new width by the width of the reference to get the scale factor, then multiply the size of one square by the same factor. Width and height use the same factor, so one calculation covers both. The grid calculator does this sum for you, and the grid method handbook covers the whole copying process.

A worked example: a reference 8 by 10 inches with 8 squares across has squares 1 inch wide. On a canvas 16 by 20 inches, the same 8 squares across are 2 inches wide each. The drawing is twice the size, and every shape lands in the same square it came from.

Whole inches or whole centimeters are easier to rule than awkward fractions. Measure one square on your printed sheet with a ruler, then pick a canvas or paper size that gives a square you can mark without guessing.

Rule the large paper

Use a long straightedge and a light pencil line. Mark the square size along the top edge and the bottom edge, and join each pair of marks for the upright lines. Do the same down the left and right edges for the level lines. Before you go further, measure both diagonals of the whole grid. When the two are equal, the corners are square.

Write the letters across the top and the numbers down the side, in the margin and outside the drawing area. Keep the same order as the photo: letters from left to right, numbers from top to bottom. On a wall, strips of masking tape at the edges hold the labels without marking the surface.

Copy square by square

Work in one square at a time and look only at that square on the photo. Notice where each line enters and leaves, and mark those points on the matching edges of the big square, for instance about halfway along the top edge. Join the marks with a light line.

Two habits help:

  • Think in shapes, not objects. A curve of cheek is a line crossing three squares. Draw the part in each square and let the parts meet.
  • Check the neighbors. A line leaving the right edge of B2 must arrive at the left edge of C2 at the same height.

Start in the corner away from your drawing hand so your sleeve does not smudge finished squares. Keep the first lines pale enough to correct.

Treat part-squares with care

When the photo does not divide evenly, the last row or column is a part-square. Rule your paper the same way: full squares first, then a final row or column cut to the same fraction. Measure the fraction on the photo against a full square and repeat the proportion on paper. Skipping this step shifts everything in the last row.

Decide which edge to trim when shapes differ

Measure both before you choose a grid. Divide the width of the photo by its height, then do the same for the paper. When the two results match, the squares fit both.

When they differ, choose what to lose before ruling a single line. Trim the part of the photo that matters least: empty sky, a blank wall, the floor in front of a figure. Keep the subject whole.

The other option is to accept a strip of bare paper along one side, which keeps every part of the picture. The strip is harmless: the drawing stays true and the blank edge can be framed out or painted over later.

Stretching the grid to fill the paper may look like a shortcut. The result is squares that are wider than they are tall, and every shape drawn inside them is stretched too.

Check the whole before adding detail

When the outlines are in, step back and set the drawing next to the gridded photo at the same distance. Compare the big relationships first: distance from eye to chin, height of a tree against its width, where a horizon crosses the page. Squint to blur detail so only large shapes remain. Fix those relationships while the lines are still light.

Squares give contours, not tone. After the outline is right, block in the darkest areas, then the middle values, and leave the lightest paper for last.

Murals, canvases and walls

Use lines that can disappear: chalk or a string line on a wall, thin charcoal on canvas, soft pencil on paper. Large squares mean fewer lines to rule, and you can stand back far enough to see each square with its neighbors. Keep the same number of squares as the photo; only the square size changes.

Work from the top down on a wall, so your hand and tools do not cross finished work. Take a photo of the wall now and then and hold the screen next to the gridded reference to catch errors while they are still small.

  1. Common mistakes to avoid

  2. Different counts. Eight columns on the photo and seven on the paper shift every shape. Count both before drawing.
  3. Uneven squares. Measure each mark from the same starting edge rather than stepping from the last mark, so errors do not add up.
  4. A grid too coarse for the detail. When one square holds a whole face, add squares and start again.
  5. Stopping at the outline. Outlines place shapes. Shading and edges make them look finished.
  6. Pressing hard. Grid and first lines should erase cleanly.
  7. Counting from the wrong corner. A1 is at the top left on the photo, so mark the same corner on the paper.

Clear the grid at the end

Wait until the drawing is finished and any ink is dry. Lift pencil lines with a soft eraser, working in one direction so the paper does not scuff. On canvas, brush charcoal or chalk lines away with a dry cloth before painting over them. Light lines from the start make this last step a few minutes of work.

Drawing a small piece of a larger scene

Sometimes only one corner of a reference matters, such as a face in a crowd or a single window in a street. Use Crop under “Adjust grid” to isolate that part before gridding, so every square lands on something you plan to draw. A tighter crop also lets Fewer squares do the work of More.

Making a drawing smaller

The same method works in reverse. Keep the number of columns and rows, and rule smaller squares on the paper. A sketchbook page copied from a large print follows the same steps, and the scale factor is simply below one.

Picking the work up again later

When you stop for the day, write the name of the last finished square in the margin, for example “done through C4”. Next time, open the same gridded photo and start at the next square in reading order. The names also make it easy to see which areas are still bare.

Sharing the job with a helper

When two people work on one big surface, give each a block of named squares, such as A1 to D4 and E1 to H4. The names on the grid make the split clear, and the neighboring blocks meet at shared edges.

FAQ

How do I enlarge a drawing by hand?

Draw a grid over your reference, rule a grid with the same number of squares on larger paper, and copy each square into its match. Where a line crosses the edge of a square, mark the same spot on the bigger square. Join the marks, and the drawing grows without changing shape.

Can I enlarge a drawing without a projector?

Yes. A pencil, a long ruler and a numbered grid are enough. Rule the same layout on larger paper and copy square by square. No special equipment, darkened room or tracing is involved, so the method works on a table, an easel or a wall.

What if my photo and my paper are different shapes?

Make the two the same shape before you grid. Under “Adjust grid”, drag the Crop corners by eye until the photo is close to the shape of your paper, or leave a strip of bare paper along one edge. Then rule the paper with the same columns and rows. Stretching one side makes the squares uneven and distorts the drawing.

How do I enlarge a drawing to other sizes?

Keep the same number of squares and make each square on the paper larger. An 8 by 10 inch reference drawn on a 16 by 20 inch canvas with 8 squares across gives 2 inch squares, twice the size. Divide the new width by the old width to get the factor.

How do I enlarge a drawing without distorting it?

Use the same number of columns and rows on the photo and on the paper, and keep every square equal. With Fewer, Medium or More, the squares are exactly square. If the last row or column is a part-square, draw a part-square of the same proportion on the paper.

Why does enlarging a drawing by eye usually go wrong?

Small errors add up. The eye judges each new shape against the one just drawn, so a slightly wide head leads to a slightly wide body, and the drawing drifts out of proportion. Squares reset the check: each has fixed edges and a name, so a mistake stays inside one square.

Is squaring up the same as the grid method?

Yes. Squaring up is the older name for the same method: divide the reference and the paper into matching squares and copy one square at a time. The numbered grid here covers the reference side, and you rule the matching grid on your paper.

Can I enlarge a drawing without marking the original?

Yes. Photograph your drawing, choose that photo here, and the grid is drawn over the picture on screen, not on the paper. Print or save the gridded picture, and only your own large paper receives pencil lines.

How do I increase drawing size when there is no computer at the wall?

Print the gridded photo once, or save it to your phone, and carry it to the wall or table. Rule the larger grid with the same columns and rows, then copy square by square. Tapping a square on screen opens it large, so a phone works as a close-up of the square you are drawing.

Do I need to change the number of squares when I make the drawing bigger?

No. Keep the same columns and rows and only make each square larger on the paper. Changing the count changes how much of the picture sits in each square, which means starting the copy again. Pick the count once, using Fewer, Medium or More, and stay with it.

Updated

Back to the tool