How do I use the Reilly method on a portrait photo?
Choose a portrait photo from your device; JPG, PNG, WebP and iPhone HEIC all open.


To use the Reilly method on a portrait photo, put a numbered grid over the reference and check your drawing against it. Choose a photo and the squares appear over it right away, named like a map, with A1 at the top left. Save the gridded picture, or print it together with an empty grid of the same size to draw on.
The Reilly method is a constructive way to draw the head: start from a simple, connected abstraction of the whole form, then work toward planes, light and detail in a set order. A grid does not replace that order, but it gives you a reliable check on where the abstraction sits in the frame. Here the grid starts at 8 squares across the short side of the photo and goes to 5 or 12.
How to use reilly method
Choose a portrait photo
Press “Choose a photo” and pick a head or portrait picture. On a computer you can also drag the photo onto the page. A sideways phone photo is turned the right way up.
Pick how many squares
The numbered grid appears at once on Medium, with 8 squares across the short side. Press Fewer for 5 squares across or More for 12, and tap any square to see it large.
Save or print the grid
Press Print for two sheets at true size: the photo with its grid, then the same grid empty. Choose 100% or actual size in the print window. On a phone, “Save to Photos” opens the share sheet.
Draw on the empty grid
Rule the same squares on your paper, or use the empty printed sheet. Lay in the large abstraction first, then use square names like C4 to check where the chin, brow line and edges of the head fall.
Choose a photo that suits the method
Pick a reference where the head is large in the frame and the light is clear. A single strong light source gives you distinct light and shadow shapes, and those shapes are what the later stages of the method rely on. A flat, evenly lit snapshot gives the grid something to measure but very little to model. If you have the choice, take the photo with the head turned slightly rather than straight on, so the planes are easier to read.
Crop out empty space before you start. Under “Adjust grid” the Crop control lets you trim the photo so the head fills most of the frame. Squares then land on the face instead of on a blank wall, and each one carries more to compare.
Match the grid to your stage of the drawing
Different stages need different amounts of detail, so change the square count as you go rather than settling on one.
Print one sheet at each count if you like. Drawing lightly on the 5-square version, then moving to the 8-square one, mirrors the idea of going from large to small.
- Fewer, with 5 squares across the short side, suits the first lay-in. Large squares make you think about the overall shape of the head, the tilt of the main axis and where the mass sits in the frame.
- Medium, with 8 squares, works for placing the major landmarks: hairline, brow, base of the nose, mouth line and chin.
- More, with 12 squares, is for checking small relationships once the planes are in place, such as the width of an eye against the space between the eyes.
Lay in the abstraction first
Before you draw a single feature, sketch the whole head as one connected shape with a clear direction. Use the square names to place its extremes: the highest point of the skull, the lowest point of the chin, and the widest points on each side. Write the names on a scrap of paper if it helps, for example “top in B1, chin in C7.”
Keep the lines light and the shapes plain. The grid is there so you can see whether the abstraction is too wide, too short or sitting too far to one side, not to pull you toward outlines early.
Use the squares to check, not to copy
The grid works best as a proofing tool. Draw a section freely, then hold it against the matching square on the photo and ask where a line enters and leaves the square. If the jaw crosses the bottom edge of D6 in the photo and crosses D6 lower on your paper, you have found the error without measuring anything.
Opening squares one at a time and stepping through them in reading order is a good way to do this. Going across a row can reveal a pattern, such as the whole right side of the face running a little wide, which you would miss looking at one feature at a time.
Draw the planes and light on the empty grid
Once the construction holds, the empty printed grid becomes your working surface. Put tracing paper over it if you want to try the planes of the head without touching the lay-in underneath. Block the large light and shadow shapes first, as simple areas with hard-edged boundaries. Refine the edges afterward, softening some and keeping others crisp.
Turn on “Black and white photo” under “Adjust grid” if you want to read values without color pulling your attention away. Mid-tones and dark accents become easier to separate, which suits the stage where you decide how many values the drawing needs.
Set the lines so they help the drawing
A grid that fights the face is hard to use. On a dark photo, white lines read best; on a pale one, dark lines do. If the lines crowd the eyes and mouth, lower the opacity or thin the line under “Adjust grid” until the features show through and the squares are still easy to follow.
Switch the square names off if you only need the lines. Remember that the names disappear from both printed sheets, so keep a saved copy with names for reference when you want to talk about a square by its label.
The half-square guide lines suit portraits well. They add a dashed cross through the middle of every square, which helps when the corner of an eye or the edge of a nostril sits close to the middle of a square and you want to place it with more care.
Draw on your own paper from the grid
If you prefer a larger drawing than the printed sheet, rule the same number of squares on your paper. Use the width figure printed on each sheet to keep the squares equal, and make each square on your paper the same shape as the one on the sheet. A drawing twice as wide needs squares twice as wide, and the photo’s squares stay square.
Rule the grid very lightly with a hard pencil so it can be erased or drawn over. Label the columns with letters and the rows with numbers along the edges, the same way as on the photo, so you can move between the two without counting.
When the first lay-in is down, step back from the page and look at the whole head again before you add anything. Squinting at it helps you see the large shapes and any lean or tilt that looks wrong.
Ideas for practice
Work from the same photo three times. Spend the first session on the abstraction alone, using the 5-square grid, and stop before any features appear. In the second, add the planes and the large shadow shapes on the 8-square grid. In the third, finish the edges with the 12-square grid. Putting the three drawings side by side shows how much of a head can be settled before detail begins.
For a figure study, repeat the exercise with a full-length photo. A longer image gives you more squares down than across, so you can compare how far the head sits from the shoulders and feet on the page. When a drawing has begun to feel familiar, turn on “Mirror the photo” under “Adjust grid” and compare it with your drawing held up to a mirror, since reversed proportions often make errors easier to see.
FAQ
What is the Reilly technique?
The Reilly technique is a constructive way to draw the head or figure. You begin with a simple, rhythmic abstraction of the whole form, then refine it through planes, light and shadow, and edges. Detail comes last, so early mistakes in proportion are caught while they are still easy to fix.
Does a grid fit the Reilly method?
Yes, as a check on placement. The method asks you to see the large relationships first, and a grid shows exactly where each of those relationships sits on the reference. Draw the abstraction in your own way, then compare its landmarks with the squares to see what has drifted.
How many squares should I use for a head?
Medium, with 8 squares across the short side, is a good place to begin for a head and shoulders photo. Fewer, with 5, suits a quick block-in of big shapes. More, with 12, helps when you are placing smaller forms such as the eyes and the corners of the mouth.
Can I see the middle of each square?
Yes. Open “Adjust grid” and switch on the half-square guide lines. Each square then has a center cross, which helps when a feature sits near the middle of a square and you want to place it more closely.
What size will the printed squares be?
Each printed sheet states the width of its squares, for example 1.48 inches. Paper is Letter or A4 depending on your browser’s region, and you can change it to Letter, A4 or A3 under “Adjust grid.” Choose 100% or actual size when printing so the figure stays true.
Do I need to sign up, and is my photo uploaded?
No sign-up is needed and the tool is free, with no watermark on the result. The photo is opened and drawn in your browser and is never uploaded. It works on phones, tablets and computers with nothing to install.
Can I change the color of the grid lines?
Yes. The tool starts with dark lines on a light photo and white lines on a dark one. Under “Adjust grid” you can choose black, white or any color, and change the line thickness and opacity. A fainter line stays out of the way of the shadows in a portrait.
Updated
Related tools
- 10x10 gridPrint a blank 10x10 grid with 100 squares in three sizes. Add numbers 1 to 100, then print the sheet or save it as a clear PNG.
4 Quadrant Graph PaperPrint free 4 quadrant graph paper with bold x and y axes, numbered both ways from 0. Pick square size and paper, then save as PDF, PNG or JPG.- 8x8 gridPrint a free 8x8 grid of 64 squares in your browser. Pick Small, Medium or Large squares, add letters and numbers, then print or save a PNG.
Add grid to photoAdd a grid to any photo in your browser, with no sign-up and no watermark. Get a numbered grid or a plain grid overlay, then save it or print it at true size.- Ar TracingInstead of ar tracing with a phone stand, put a numbered grid on your own photo, then save or print it and copy it square by square. Free, no sign-up.
Aspect Ratio CalculatorUse this aspect ratio calculator to turn a width and height into a ratio like 16:9. You also get the decimal and a resize that keeps the shape.- Atmospheric PerspectiveAdd a numbered grid to a photo and compare near and far squares to see atmospheric perspective: lighter values, softer color. Free, in your browser.
- Bargue DrawingPractice Bargue drawing from your own photo: add a numbered grid with 5, 8 or 12 squares across, then save it or print a gridded sheet and an empty one.