How do I transfer a drawing to canvas?
Choose a photo of your drawing (JPG, PNG, WebP or iPhone HEIC) to split it over sheets.


Here is how to transfer a drawing to canvas at full size: photograph the drawing, choose the photo here, set the width of the poster you want and print it on several sheets. Tape the sheets into one pattern, slide transfer paper under it and trace the lines onto the canvas.
To transfer a drawing to canvas, make a pattern the same size as the canvas, then trace its lines through transfer paper or graphite onto the surface. Printing the photo of your drawing across taped sheets gives you that pattern without a copy shop. Tick the grid option if you would rather draw the lines by eye, square by square.
How to use how to transfer a drawing to canvas
Choose a photo of your drawing
Press “Choose a photo” and pick a straight-on picture of the drawing. The poster choices are already open below the picture, so you can set the size right away.
Set the poster width
Set “Sheets across” or type a “Poster width” to match your canvas. The line under it tells you how many sheets you need, how wide the poster prints and how sharp the photo will look.
Print the sheets and tape them
Save the PDF and print it at 100% or actual size. Neighboring sheets share a narrow strip of the same picture, so you can line them up and tape them into one pattern.
Trace the lines onto the canvas
Tape the pattern to the canvas with transfer paper underneath, then trace the main lines with a firm pencil. Lift one corner now and then to check that the lines are coming through.
Who this suits and when
A painter who has worked out a composition in a sketchbook usually wants to keep every line of it when the canvas comes out. Copying by eye at a much larger size is where proportions drift. A printed pattern at the final size removes that risk, so the first minutes at the canvas go to painting rather than redrawing.
The same approach helps with a quick pencil study, a child’s drawing you want to paint larger, a lettering layout or a mural sketch for a bedroom wall. In each case the drawing already exists and the job is to carry its shapes across without changing them.
Photograph the drawing before you print
The pattern is only as good as the picture, so take a few minutes over it.
If the pencil is faint, darken the main contours lightly before taking the picture. Pale lines that are easy to see in the room can disappear in a small photo. Tapping “Adjust grid” gives you Crop and Rotate if the picture has a wide border or came in sideways.
- Lay the drawing flat on a table near a window, with the light coming evenly across the paper.
- Hold the phone directly above the middle of the sheet, parallel to the paper, so the edges stay straight.
- Fill the frame with the drawing and avoid cropping any edge you need.
- Keep your own shadow off the page.
Match the pattern to the canvas
Measure the canvas first and write the width down. Type that figure as the poster width, or change “Sheets across” until the line under it shows a width close to your canvas. The sheet count tells you how much paper and ink to expect before you press print.
Watch the pixels per inch figure too. The free PDF goes up to 150. Under 100 looks soft up close, which is fine for tracing big shapes but poor for fine detail. If the number is low, set a smaller poster width, or use Pro, which works from your full photo at up to 300.
If the canvas and the drawing have different shapes, the pattern will leave a strip of bare canvas on one side. Decide before you tape whether you want that strip as extra margin or whether you will extend the drawing later.
Print and tape the sheets in order
In the print window, choose 100% or actual size. Scaling to fit the page shrinks every sheet and breaks the poster width you set. Print one sheet first and measure the picture on it against the width the tool gave you.
Lay the sheets out on a clean floor in rows. Neighboring sheets repeat a 6 mm strip of the same picture. Each sheet has a white edge, so trim the edge on the joining side of the sheet that lies on top, then lay it over the 6 mm strip of the same picture on the next sheet and line the picture up. Tape the seams on the back with low-tack masking tape, working from the top row down. Keep the tape off the lines you plan to trace.
Get the lines onto the canvas
With transfer paper
Tape the top edge of the pattern to the canvas like a hinge. Slide graphite or carbon transfer paper, coated side down, between the pattern and the canvas. Trace the main lines with a sharp pencil and steady pressure. Lift the pattern from the bottom to check a section before you go on. Press harder where the line is faint and lighter where the canvas already shows a mark.
Without it
Turn the pattern over and rub the back with a soft graphite stick or willow charcoal across the areas where lines run. Wipe away loose dust with a tissue so it does not smudge the canvas. Tape the pattern face up and trace with a hard pencil. The lines come through as a soft grey line that is easy to paint over.
With grid lines
If you would rather draw than trace, tick “Print grid lines on the poster”. Draw matching squares on the canvas with a straightedge and a light pencil, then copy the content of each square. The grid also works as a check on a traced drawing: if a line falls in the wrong square, you can see it at once.
Trace less than you think
Trace the outlines of big shapes, the placement of the eyes, nose and mouth in a portrait, the horizon, and the edges of the main shadows. Leave the texture, the hair strands and the small details for the brush. A pattern with fewer lines leaves the canvas cleaner, and the painting stays yours instead of looking like a colored-in print.
After tracing, step back and compare the canvas with your original drawing. Check the spacing between the main landmarks first, then the angles of the long lines. A small error is much easier to fix now than after the first layer of paint.
Fix the lines before painting
Graphite and charcoal can lift into wet paint and turn it muddy. Go over the traced lines with a thin line of paint in a neutral brown, using a small round brush and thinned paint. Let the lines dry, then brush away loose charcoal. A light coat of fixative spray, used outdoors or in a ventilated room, holds pencil and charcoal lines in place if you prefer to leave them uncovered.
Once the lines are secure, you can block in the large shapes with thin color. Keep the pattern sheets. If a line disappears under the first layer, tape the pattern back in the same position and retrace only that part.
When the canvas is bigger than a few sheets
A wide canvas needs more sheets than the free PDF gives. Work in sections: print one part of the drawing at the full width in one go, transfer it, then crop the photo and print the next part. Or use Pro for a larger sheet count, cut marks and a page showing how the sheets fit, which makes assembly of a long pattern faster.
If you need the image reversed, for example to transfer onto fabric with an iron, Pro also has a mirror option. For canvas work you normally leave the picture facing the same way as your drawing.
FAQ
What is the best way to transfer a drawing to canvas?
Tracing through transfer paper from a full-size pattern is the most reliable way. The pattern keeps your proportions, and the canvas stays clean while you press the lines through. Print your drawing at the canvas width on taped sheets, trace only the main shapes, then check the result against your original.
How can I transfer a drawing to canvas without tracing paper?
Coat the back of the printed pattern with soft graphite or charcoal, tape it face up to the canvas and trace over the lines with a hard pencil. The coating works as your own transfer paper. Or tick the grid lines option and copy the drawing square by square.
Is there a way to transfer a picture to a canvas?
Yes. Choose the picture, set a poster width that matches the canvas and print the sheets. Tape them together, slide transfer paper under the pattern and trace the outlines onto the canvas. The photo is read in your browser, so you can start right away.
How big can the pattern be for free?
The free PDF covers up to 2 by 2 sheets at 150 dots per inch, which suits a small to medium canvas. Larger patterns with more sheets, cut marks and a page showing how the sheets fit come with Pro. Paper is Letter or A4 from your browser’s region, and A3 is under “Adjust grid”.
Is my drawing uploaded anywhere?
No. The photo is read and drawn inside your browser and stays on your device. The tool is free to use, needs no sign-up and adds no watermark. It works on phones, tablets and computers, so you can start from a picture taken at the easel.
Updated
Related tools
- 10x10 gridPrint a blank 10x10 grid with 100 squares in three sizes. Add numbers 1 to 100, then print the sheet or save it as a clear PNG.
4 Quadrant Graph PaperPrint free 4 quadrant graph paper with bold x and y axes, numbered both ways from 0. Pick square size and paper, then save as PDF, PNG or JPG.- 8x8 gridPrint a free 8x8 grid of 64 squares in your browser. Pick Small, Medium or Large squares, add letters and numbers, then print or save a PNG.
Add grid to photoAdd a grid to any photo in your browser, with no sign-up and no watermark. Get a numbered grid or a plain grid overlay, then save it or print it at true size.- Ar TracingInstead of ar tracing with a phone stand, put a numbered grid on your own photo, then save or print it and copy it square by square. Free, no sign-up.
Aspect Ratio CalculatorUse this aspect ratio calculator to turn a width and height into a ratio like 16:9. You also get the decimal and a resize that keeps the shape.- Atmospheric PerspectiveAdd a numbered grid to a photo and compare near and far squares to see atmospheric perspective: lighter values, softer color. Free, in your browser.
- Bargue DrawingPractice Bargue drawing from your own photo: add a numbered grid with 5, 8 or 12 squares across, then save it or print a gridded sheet and an empty one.