How do I convert pixels to inches at my DPI?
To convert pixels to inches, divide the pixel count by the DPI. Type a size in pixels or in inches, set the DPI, and the other unit fills in at once, along with the size in centimeters. A table shows the same pixels at 72, 150, 300 and 600 DPI. Buttons for common print sizes give the pixels a print needs, and a photo can give its pixel size for you.
Pixels
Inches
6.4 × 3.6 in
1,920 × 1,080 pixels at 300 DPI is 6.4 by 3.6 inches, or 16.26 by 9.14 cm.
The same pixels at other DPI
| 72 DPI | 26.67 × 15 in | 67.73 × 38.1 cm |
|---|---|---|
| 150 DPI | 12.8 × 7.2 in | 32.51 × 18.29 cm |
| 300 DPI | 6.4 × 3.6 in | 16.26 × 9.14 cm |
| 600 DPI | 3.2 × 1.8 in | 8.13 × 4.57 cm |
6.4 × 3.6 in
Divide pixels by DPI to get inches: 3000 pixels at 300 DPI is 10 inches. To go the other way, multiply inches by DPI. The same pixels give a larger print at a lower DPI and a smaller print at a higher one.
How to convert pixels to inches
Enter a size
Type the width or height in pixels (whole numbers, from 1 to 100,000) or in inches (decimals are fine, from 0.01 to 1,000).
Set the DPI
Leave 300 for a sharp print, press 72, 150 or 600, or type any value from 1 to 9,600 that your job calls for.
Read the other unit
The matching inches or pixels appear immediately, with centimeters and a table showing the same pixels at 72, 150, 300 and 600 DPI.
Start from a print size or a photo
Press a common print size, from 4 by 6 up to 16 by 20 inches, to get the pixels needed. Or pick a photo to read its pixel size.
Check a photo before you order a print
A photo can look large on a screen, but paper is measured in inches. Enter the pixel width and read the inches at 300 DPI. Then look at the table to see how the same pixels spread at lower settings. The lower the DPI at your target size, the softer the print looks when held close.
Press a print size button, such as 4 by 6 or 16 by 20, and compare the pixels needed with the pixels your photo has. A photo that falls short for a large print can still make a smaller one, so try the next size down.
Set up a flyer or poster file
Start from the paper, not the artwork. For an 8.5 by 11 inch flyer, enter the inches and keep 300 DPI. At 300 DPI that page is 2550 by 3300 pixels. Put those numbers in the new-document dialog of your design program. Setting the size correctly at the start avoids stretching an image later.
If the flyer has a margin or bleed, add it to the inches first. Add the bleed to both sides of each dimension, enter the larger inch sizes, and read the pixel counts from those figures.
Pick the DPI for the job
A higher DPI is not always better. Choose by how the file will be used:
The table of all four DPI values for the same pixels helps here. Find your pixel count once, then read across to see how large it prints at each setting.
- 72 DPI is a setting some print workflows still use
- 150 DPI is often used for drafts and large prints viewed from a distance
- 300 DPI is a common target for photos, flyers and cards held in the hand
- 600 DPI is often used for fine line art
Work backwards from a frame
When you already own a frame, type its size in inches and read the pixels. Then compare that count with your photo. If you plan to crop a photo to fit the frame, check that the photo still has enough pixels after cropping, since cropping removes pixels.
Centimeters are shown beside the inches, so sizes from a print shop that works in metric need no second conversion.
Keep the shape when you resize
Changing only the width stretches the picture unless the height changes in the same proportion. To get the matching height for a new width, use the aspect ratio calculator. Then type both sides here to read the print size or the pixels.
Compare your pixels with what a print needs
When a design is made for a screen and later printed, work out the print size first. Type the width in pixels that you have and read the inches at 300 DPI. Then type the print size in inches and read the pixels that 300 DPI needs. If you have fewer pixels than the print needs, the artwork should be redrawn larger.
Round sensibly
Pixels are whole numbers, while inches and centimeters show 2 decimals. For a print order, choose the nearest standard paper size and let the photo fill it. You do not need to match the exact decimal.
To get a sharper result, raise the pixel count at the source. Typing a larger DPI only shrinks the printed size.
FAQ
How many pixels are in 1 inch?
The number of pixels in 1 inch equals the DPI. At 300 DPI, 1 inch holds 300 pixels. At 72 DPI it holds 72, and at 600 DPI it holds 600. No single answer exists until a DPI is chosen, which is why the calculator starts at 300 and lets you change it.
What size is 1920x1080 pixels in inches?
Divide each side by the DPI. At 300 DPI, 1920 by 1080 pixels is 6.4 by 3.6 inches. At 72 DPI it is 26.67 by 15 inches. The shape is 16:9, so a higher DPI gives a smaller print and a lower DPI gives a larger one.
How much is 100 pixels in inches?
Divide 100 by the DPI. At 300 DPI, 100 pixels is 0.33 inches, and a lower DPI gives a longer result. Type 100, pick the DPI you need, and read the answer in inches and centimeters.
How many pixels fill a Letter page of 8.5 by 11 inches?
Multiply each side by the DPI. At 300 DPI, an 8.5 by 11 inch page is 2550 by 3300 pixels. At 150 DPI it is 1275 by 1650 pixels. Use those numbers as the canvas size for a flyer.
Is 1 inch 300 pixels?
Only at 300 DPI. One inch is a fixed length, while a pixel has no fixed size, so the number of pixels per inch changes with the resolution. A file printed at 300 DPI uses 300 pixels per inch. The same file at 150 DPI uses 150.
Can I use a DPI other than 300?
Yes. The DPI field accepts any value from 1 to 9,600, so type your own number and the conversion follows. The quick buttons cover 72, 150, 300 and 600. Pick the value your print job asks for.
What is PPI, and is it the same as DPI?
PPI means pixels per inch, the count of pixels across one inch of an image. DPI means dots per inch and is the term most often used for print resolution. When you convert pixels to inches, both numbers are used the same way: divide the pixels by the figure.
Can I check my photo’s print size from the photo itself?
Yes. Pick a photo to read its pixel size, and the print size in inches and centimeters follows at your chosen DPI. You do not have to read the width and height from the file details and type them in.
Updated
Related tools
- 10x10 gridPrint a blank 10x10 grid with 100 squares in three sizes. Add numbers 1 to 100, then print the sheet or save it as a clear PNG.
4 Quadrant Graph PaperPrint free 4 quadrant graph paper with bold x and y axes, numbered both ways from 0. Pick square size and paper, then save as PDF, PNG or JPG.- 8x8 gridPrint a free 8x8 grid of 64 squares in your browser. Pick Small, Medium or Large squares, add letters and numbers, then print or save a PNG.
Add grid to photoAdd a grid to any photo in your browser, with no sign-up and no watermark. Get a numbered grid or a plain grid overlay, then save it or print it at true size.- Ar TracingInstead of ar tracing with a phone stand, put a numbered grid on your own photo, then save or print it and copy it square by square. Free, no sign-up.
Aspect Ratio CalculatorUse this aspect ratio calculator to turn a width and height into a ratio like 16:9. You also get the decimal and a resize that keeps the shape.- Atmospheric PerspectiveAdd a numbered grid to a photo and compare near and far squares to see atmospheric perspective: lighter values, softer color. Free, in your browser.
- Bargue DrawingPractice Bargue drawing from your own photo: add a numbered grid with 5, 8 or 12 squares across, then save it or print a gridded sheet and an empty one.